Εργοστάσιο ανάμειξης σκυροδέματος κάδου εναέριας κεφαλής

Εργοστάσιο ανάμειξης σκυροδέματος κάδου εναέριας κεφαλής

Επισκόπηση προϊόντος

The Overhead Bucket Concrete Mixing Plant places cement, fly ash, and other powder silos on top of the main mixing building, giving the main building a smaller footprint than common market structures.

Aggregates are conveyed above the mixer by intermittent vertical skip hoist lifting. The layout occupies less space and offers better environmental and energy-saving performance. Dual-rope lifting and multiple limit protections ensure stable equipment operation, making it an intensive mixing plant for sites that must balance capacity, footprint, and reliability.

Πεδία Εφαρμογών

It is mainly suitable for municipal projects with limited space, urban medium and small building construction, rural infrastructure projects, and on-site material supply for medium and small highway, water conservancy, and other linear works with tight sites and moderate schedules.

Πλεονεκτήματα πυρήνα

The lifting system follows lifting-industry standards and uses an independent variable-frequency motor, European-standard industrial gearbox, and dual hydraulic brakes for stable, reliable, energy-saving operation and convenient maintenance.

The anti-fall system uses synchronized dual wire-rope lifting. The two wire ropes do not wear at the same time, and each wire rope can operate independently.

The concrete main building uses column bearing, providing good overall force transmission, low vibration, fewer columns, and a more reasonable room design.

The overall steel structure uses a round-tube main body, requiring higher processing standards and providing a stable, reasonable structure.

The conical finished-material hopper resists material adhesion and is equipped with high-strength wear-resistant liners for longer service life.

The curved-arm mixer design improves mixing performance, increases speed, and enhances concrete workability.

The raised mixer cover allows powder to be premixed before entering the mixer, directs all materials into the mixer center, prevents shaft wrapping, and improves mixing efficiency.

The metering scale body uses a three-point sensor design for higher metering accuracy.

The aggregate temporary storage hopper has high-strength wear-resistant liners and a flat discharge opening with dual discharge doors, supporting smoother feeding and alternating door operation under high current to protect the motor and reducer.

The powder conveying system uses an air-floating chute with an independent fan for more stable air volume. Dual butterfly valves provide coarse and fine metering for more accurate powder measurement.

The dust collection system uses extended powder dust removal pipelines, reducing dust while avoiding powder waste.

Τεχνικές Προδιαγραφές